Kelfar Technologies AK-5 PRO SE Manual Manual page 59

5. Setting the Pitch Bend range to 2/-2 and the step to Continuous for Programs Bank M (MOSS)
A.
Press the Edit Button
B.
Press the Button P1
C.
Touch OSC Basic
D.
Set the Pitch Bend Range to JS (+X) +2, Step > Continuous
E.
Set the Pitch Bend Range to JS (-X) -2, Step > Continuous
F.
Write Program "If you turn the power off or select a different program before writing,
the data cannot be recovered."
6. For Bank M (Moss) only: Reed and Brass oscillators
A.
Press the Edit Button
B.
Press the Button P2
C.
Touch OSC 1
D.
Uncheck the Jump Bend Boxes (+X) (-X)
E.
Write Program "If you turn the power off or select a different program before writing,
the data cannot be recovered."
59
AK-5 Pro SE/VERSION 4
www.kelfar.net
Copyright © 2005-20 Kelfar Technologies