Table of Contents
Advertisement
Use the Transpose buttons to Turn ON/OFF:
EP
Expression Pedal is ON - TR (-)
OFF Expression Pedal and Breath Controller are OFF for (MIDI1) - RESET
BC
Breath Controller is ON for Primary (MIDI1) - TR (+)
7.
Press
CANCEL/POWER
8.
LED Display shows
9.
Select the Incoming / Outputting Midi Channel and set to channel
TRANSPOSE/ADJUST (+) and (-)
10.
Press Tune/Setup to confirm the Primary Channel Input
The LED Display shows CCn (Momentarily)
11.
The LED Display shows Cxx (xx=00 to 119) or UL (Master Volume) i.e C11
12.
13.
Select the Control Change Number by using the Transpose/Adjust buttons.
14.
Press
CANCEL/POWER
The LED Display shows Cux (x=0 to 8)
15.
16.
Select the Curve by using the Transpose/Adjust buttons.
17.
Press
CANCEL/POWER
18.
After programming the Primary Instrument:
19.
LED Display shows
20.
Press appropriate key to select the Brand of the instrument.
21.
21.Press CANCEL to skip programming the Secondary Instrument.
22.
Skip to step # 31
The AK-5 Pro SE will reboot without programming the Secondary Instrument and the (MIDI2)
port will not output any data. In another word, the MIDI PORT for (MIDI2) has been flittered
OFF.
LED Display shows
23.
Press appropriate key to select the specific Model of the instrument.
24.
Expression and Breath Controller statues.
The LED Display shows EP or OFF or BC
Use the Transpose buttons to Turn ON/OFF:
EP
Expression Pedal is ON - TR (-)
OFF Expression Pedal and Breath Controller are OFF for (MIDI2) - RESET
BC
Breath Controller is ON for Secondary (MIDI2) - TR (+)
AK-5 Pro SE/VERSION 4
www.kelfar.net
to set up the Incoming Channel
Pc1
(Primary Channel Input) for Mode 5
buttons.
to setup the Curvature by using the Transpose/Adjust buttons.
to Exit programming the Universal Mode (Primary Instrument MIDI1)
S1
S2
Copyright © 2005-20 Kelfar Technologies
1
by using the
54
Advertisement
Table of Contents
