Table of Contents
Advertisement
4. USB INTERFACE ENABLE / DISABLE PORTS 1 & 2
By Default the AK-5 Pro USB INTERFACE PORT 1 IS ENABLED
Press DIRECT to ENABLE / DISABLE.
The LED Display shows P01
Enable/Disable the USB PORTS by using the Transpose/Adjust buttons.
A. (+) Enable/Disable Port 1: 0 is OFF, 1 is ON
B. (RESET) Enable/Disable Port 2: 0 is OFF, 1 is ON
Options available:
A. P01 PORT 1 is ON. B. P11 PORTS 1&2 are ON. C. P10 PORT 2 is ON.
D. P00 PORTS 1&2 are OFF.
If USB PORTS 1&2 are OFF [P00], pressing the DIRECT or CANCEL
The LED Display shows USB OFF momentarily and exit the USB MODE.
Breath Controller ON/OFF
Press and Hold the Direct for one second to Turn OFF/ON the BC for both the Primary and
Secondary.
The LED Display shows -SC>PBc On / SBc On momentarily
Or
The LED Display shows -SC>PBc OFF / SBc OFf momentarily
Note: In order for this operation to work the BC must be turned ON for the Primary or Secondary
(MIDI1 or MIDI2.)
15
AK-5 Pro SE/VERSION 4
www.kelfar.net
Copyright © 2005-20 Kelfar Technologies
Advertisement
Table of Contents
