User Scales; Transposition - Kelfar Technologies AK-5 PRO SE Manual Manual

3. User Scales

AK-5 Pro User Scales 01 to 09 are programmable. User Scale 00 is the default detuning of -50 cents. User
Scale 00 is predefined by the AK-5 Pro and cannot be reprogrammed.
Selecting User Scales in real time.
Example:
To Select User Scale 03
1. Press
TUNE/SETUP
2. The Display shows the existing User Scale
3. Press D#
4. Press
TUNE/SETUP
Note: When selecting User Scale 00 the AK-5 Pro will recall User 00 and exit the operation.

4. Transposition

To transpose a keyboard/synthesizer in Chromatic Steps: -12 to +12, use the
buttons.
The Red button (RESET) Resets the value to 00 or press the Red button (RESET) again will restore the
previously transposed value.
Black (+) = Increment in positive values
Black (-) = Decrement in negative values
The values are displayed on the three digits display.
Note: The transpose feature is defined by your synthesizer and specific to each manufacture. The
following midi events are supported: GM2, XG, GS, Ketron, DSI / Sequential, Coarse Tuning. In
Universal Mode, Kelfar Technologies Transpose Algorithms
31
AK-5 Pro SE/VERSION 4
www.kelfar.net
to exit.
Copyright © 2005-20 Kelfar Technologies
TRANSPOSE/ADJUST (+) and (-)
©