Table of Contents
Advertisement
25.
Press CANCEL to Select the MIDI CHANNELS by using the following buttons: (C to B) 1CH
to 12CH, Tune/Setup 13CH, TR (-) 14CH, RESET 15CH, TR (+) 16CH.
The LED Display shows SCH
26.
Press Cancel to setup the Control Change.
The LED Display shows CCn (Momentarily)
The LED Display shows Cxx (xx=00 to 119) i.e C11
27.
28.
Select the Control Change Number by using the Transpose/Adjust buttons.
29.
Press CANCEL to setup the Curvature by using the Transpose/Adjust buttons.
30.
The LED Display shows Cux (x=0 to 8)
31.
Select the Curve by using the Transpose/Adjust buttons.
32.
Note: If either the Expression or Breath controller are ON then you will be able to select
the MIDI CHANNELS, CONTROL CHANGE, and CURVATURE. If the Expression or Breath
controller are OFF then the step will be skipped by pressing the CANCEL button.
33.
Press CANCEL to setup the USB MIDI PORTS 1&2
The LED Display shows i.e P01
34.
35.
Enable/Disable the USB PORTS by using the Transpose/Adjust buttons.
A. (+) Enable/Disable Port 1: 0 is OFF, 1 is ON
B. (RESET) Enable/Disable Port 2: 0 is OFF, 1 is ON
36.
Options available:
C. P01 PORT 1 is ON. B. P11 PORTS 1&2 are ON. C. P10 PORT 2 is ON.
D. P00 PORTS 1&2 are OFF.
37.
38.
If USB PORTS 1&2 are OFF [P00], press CANCEL
The LED Display shows USB OFF momentarily and exit the USB MODE.
39.
40.
Press CANCEL to Exit programming the Secondary Instrument (MIDI2).
The LED Display shows FP (Fully PROGRAMMED)
41.
Note: After pressing CANCEL the LED will turn RED. After successfully inputting the new
settings, the LED will return to GREEN.
After displaying FP the AK-5 Pro reboots indicating successful programming by displaying the
initial setting and Viewing Instrument Selections.
55
AK-5 Pro SE/VERSION 4
www.kelfar.net
Copyright © 2005-20 Kelfar Technologies
Advertisement
Table of Contents
