Table of Contents
Advertisement
Follow the steps below to ensure that the AK5 Pro SE operates correctly with Korg Trinity V3.
If some of the sounds are not micro-tuned properly, then it is possible that the Pitch Bend range is
not set to 2/-2 or the Jump Bend boxes are unchecked. This guide will assist you in setting up all
the correct parameters for individual Programs, all Programs, or Combinations Banks A, B, C, D,
and the Programs in Bank M (MOSS).
The AK4 Pro SE operation is Mono or Mono Legato in Universal Mode. It is possible, however,
to play a maximum of 10 Polyphonic voices in Equal-Temperament scales. To avoid getting out-
of-tune notes while playing microtonal in Polyphonic, then it is best adjust your ADSR to lower
values for the Decay, Release, or Sustain.
1. Press the Global button. Then Press the Global button P1
A.
Key Transpose +00
B.
Position: PreTG
C.
Midi Channel 1
D.
Uncheck the box Local Control On
AK-5 Pro SE/VERSION 4
www.kelfar.net
Copyright © 2005-20 Kelfar Technologies
56
Advertisement
Table of Contents
