Table of Contents
Advertisement
The LED Display shows CCn
7. Press CANCEL to setup the Control Change.
8. The LED Display shows Cxx (xx=00 to 119) or UL (Master Volume) i.e C11
9. Select the Control Change Number by using the Transpose/Adjust buttons.
10. Press CANCEL to setup the Curvature by using the Transpose/Adjust buttons.
11. The LED Display shows Cux (x=0 to 8)
12. Select the Curve by using the Transpose/Adjust buttons.
13. Press CANCEL to Exit programming the Primary Instrument (MIDI1).
Note: If either the Expression and Breath controller are ON then you will be able to select the MIDI
CHANNELS, CONTROL CHANGE, and CURVATURE. If the Expression or Breath controller are OFF then the
step will be skipped by pressing the CANCEL button to program the Secondary Instrument (MIDI2).
10. If you do not want to Program the Secondary instrument then press CANCEL/POWER.
AK-5 Pro SE/VERSION 4
www.kelfar.net
Copyright © 2005-20 Kelfar Technologies
38
Advertisement
Table of Contents
