Kelfar Technologies AK-5 PRO SE Manual Manual page 30

Depending on your selection, if no notes are selected then the incoming notes will be sent to the Primary
Channel. However, each selected note will be sent to Secondary Channel as programmed by the user.
All incoming midi events received by the Primary Channel will be resent to both Primary Channel and
Secondary Channel.
Note: Midi Messages (Events) supported: *Running Status * Note On/ Off * Poly Aftertouch * Channel
Aftertouch * Control Change * *Program Change * Pitch Bend * System Exclusive * System Common *
System Realtime*
Mode 2 (Pitch Bend): Incoming notes will be routed and sent to a selected channel PC or SC.
Depending on your selection, if no notes are selected then the incoming notes will be sent to the Primary
Channel. However, each selected note will be sent to Secondary Channel as programmed by the user. (See
page 4)
All incoming midi events received by the Primary Channel will be resent to both Primary Channel and
Secondary Channel.
Note: Midi Messages (Events) supported: *Running Status * Note On/ Off * Poly Aftertouch * Channel
Aftertouch * Control Change * *Program Change * Pitch Bend * System Exclusive * System Common *
System Realtime*
Mode 3 (Pitch Bend) / Mode 6 (Fine Tune): In this mode the AK-5 Pro SE operation will be in
monophonic.
Mode 4 (Pitch Bend) / Mode 7 (Fine Tune): Each selected note will be routed and sent to its own
channel as defined by the AK-5 Pro. In order for this mode to work, your midi keyboard must be
operating using Channel One (ch.1). (Refer to your keyboard/ synth Owner's Manual)
Notes:
1. If no notes are selected then the incoming notes will be resent to Channel One.
2. Selected notes will be sent to the following channels:2,3,4,5,6,7,8,9,11,12,13,14
All incoming midi events received by the Primary Channel will be resent to 13 channels.
Note: Midi Messages (Events) supported: *Running Status * Note On/ Off * Poly Aftertouch * Channel
Aftertouch * Control Change * *Program Change * Pitch Bend * System Exclusive * System Common *
System Realtime*
Mode 5 (Pitch Bend) / Mode 8 (Fine Tune): In this mode the AK-5 Pro SE operation will be in mono-
legato.
AK-5 Pro SE/VERSION 4
www.kelfar.net
Copyright © 2005-20 Kelfar Technologies 30