Korg M3 Series - Kelfar Technologies AK4 Pro SE Manual Manual

Making your own sound set to work with AK-4 Pro
1. Select a Program that you want to work with the AK-4 Pro
2. Press PAGE SELECT
3. SELECT P2/OSC PITCH
SELECT OSC1/ Pitch or OSC2/Pitch
4.
5. MAKE AMS to Poly After and the Intensity to -00.50 (cents) as show below
Note: if the program is using two OSC then make sure you set them both to PolyAfter
the Intensity for both is = -00.50
6. SAVE YOUR PROGRAM or WRITE IT (select the down arrow/upper right corner).
7. Select GLOBAL to set the TRANSPOSE to PREMIDI. Midi Channel = 01.
8. Select MIDI
9. Select Midi Routing
10. Make sure Midi Filter is selected for all of them (as shown in the image below)
43
AK-4 Pro SE/VERSION 3
www.kelfar.net

Korg M3 series

Copyright © 2005-19 Kelfar Technologies