Kelfar Technologies AK-5 PRO SE Manual Manual page 14

The LED Display shows EP or OFF or BC
Use the Transpose buttons to Turn ON/OFF:
EP
Expression Pedal is ON - TR (-)
OFF Expression Pedal and Breath Controller are OFF for (MIDI2) - RESET
BC
Breath Controller is ON for Primary (MIDI2) - TR (+)
Press CANCEL to Exit EXPRESSION AND BREATH CONTROLLER MODE.
3. Press the Transpose (-) to setup Curvature and Control Change.
The LED Display shows PC momentarily then Cux (x=0 to 8)
Select the Curve by using the Transpose/Adjust buttons.
Press CANCEL to setup the Secondary Instrument Curvature.
The LED Display shows SC momentarily then Cux (x=0 to 8)
Press Cancel to setup the Primary Instrument Control Change
The LED Display shows CCn
Press CANCEL to setup the Control Change.
The LED Display shows Cxx (xx=00 to119) or UL = Master Volume i.e C11
Select the Control Change Number by using the Transpose/Adjust buttons.
Press Cancel to setup the Secondary Instrument Control Change
The LED Display shows CCn
Press CANCEL to setup the Control Change.
The LED Display shows Cxx (xx=00 to119) or UL = Master Volume i.e C11
Select the Control Change Number by using the Transpose/Adjust buttons.
Press CANCEL to Exit the CURVATURE and CONTROL CHANGE MODE,
Note: If either the Expression and Breath controller are ON then you will be able to select the
MIDI CHANNELS, CONTROL CHANGE, and CURVATURE. If the Expression or Breath
controller are OFF then the step will be skipped by pressing the CANCEL button to program the
Secondary Instrument (MIDI2).
AK-5 Pro SE/VERSION 4
www.kelfar.net
Copyright © 2005-20 Kelfar Technologies 14