Table of Contents
Advertisement
1.
Go to Global mode then navigate to MIDI
2.
Check the midi filter box for Sysexlusive
3.
Write Global into the memory.
4.
Change the User Scale for each Program/Combo./Moss to User 00, Scale C and WRITE
Program/Combo/Moss.
1.
Set Sysex ID to 127
1.
Consult your Yamaha manual to change the midi setup of the Yamaha keyboard/synth.
2.
By default in some Yamaha Keyboards, such as the PSR series, the Midi channels are sent to the
Song/Sequencer.
3.
On the PSR/Tyros, you will need to make sure that the Midi_In messages are coming to the sounds that you
are playing directly on the keyboard (i.e Main=Ch1, =Ch2, etc...)
4.
Make sure the systemexclusive is enabled.
1.
Menu > System > Midi > Receive > Remote keyboard Switch > ON
2.
Menu > System > Midi > Receive > Receive Exclusive > ON
3.
System Write
*(Refer to your keyboard/ synth Owner's Manual)
33
AK-5 Pro SE/VERSION 4
www.kelfar.net
*Korg Triton series ©
*Kurzweil ©
*Yamaha XG ©
*Roland Fantom X ©
Copyright © 2005-20 Kelfar Technologies
Advertisement
Table of Contents
