Table of Contents
Advertisement
C. Short-Cuts Mode
This mode will allow you to disable and enable functions related to Expression Pedal, Breath
Controller, and USB interface without the need to reprogramming the AK-5 Pro.
Press and hold the Tune/Setup for 3 seconds
The LED Display shows --- (three dashes)
1. Press the Transpose (+) to setup MIDI CHANNELS
The LED Display shows PCH (Primary Instrument - MIDI1)
A. Select the MIDI CHANNELS by using the following buttons: (C to B) 1CH to
12CH, Tune/Setup 13CH, TR (-) 14CH, RESET 15CH, TR (+) 16CH.
After selecting the appropriate MIDI CHANNELS for the Primary Instrument, press CANCEL to
select the MIDI CHANNELS for the Secondary Instrument.
The LED Display shows SCH (Secondary Instrument - MIDI2)
B. Select the MIDI CHANNELS by using the following buttons: (C to B) 1CH to 12CH,
Tune/Setup 13CH, TR (-) 14CH, RESET 15CH, TR (+) 16CH.
Press CANCEL to Exit the MIDI CHANNELS MODE.
Note: After pressing
settings, the LED will return to GREEN.
Note: If either the Expression and Breath controller are ON then you will be able to select the
MIDI CHANNELS. If the Expression or Breath controller are OFF then the step will be skipped
and the LED Display shows (Pna) for the Primary Instrument, and (Sna) for Secondary
Instrument.
2. Press the Transpose RESET to setup the Expression and Breath Controller
A. Expression and Breath Controller statues (Primary Instrument - MIDI1)
The LED Display shows EP or OFF or BC
Use the Transpose buttons to Turn ON/OFF:
EP
Expression Pedal is ON - TR (-)
OFF Expression Pedal and Breath Controller are OFF for (MIDI1) - RESET
BC
Breath Controller is ON for Primary (MIDI1) - TR (+)
Press CANCEL to setup the Secondary Instrument.
A. Expression and Breath Controller statues (Secondary Instrument - MIDI2)
13
AK-5 Pro SE/VERSION 4
www.kelfar.net
the LED will turn RED. After successfully inputting the new
CANCEL
Copyright © 2005-20 Kelfar Technologies
Advertisement
Table of Contents
