Table of Contents
Advertisement
1. Standard Mode
In Standard Mode, the AK-5 Pro sends a particular System Exclusive midi message to a selected
instrument/brand. In order for this operation to work, your midi keyboard/synthesizer Midi In port should
be Enabled and ready to receive System Exclusive midi data. (Refer to your keyboard/ synth Owner's
Manual).
Note: Your Owner's Manual might use a shortcut name for the System Exclusive, e.g. sysex.
The 12 (C-B) buttons are used to detune a keyboard/synthesizer within the octave. Each time you select a
note the LED for that selected note will be lit ON indicating that the SYSEX message has been sent to
your synth and the selected note is detuned.
Example:
To convert synthesizer to play the Bayati makam.
1. Press
TUNE/SETUP
2. Press C for Default tuning of -50 cents.
3. Press "E" and "B"
4. Both "E & B" RED LEDs are lit ON indicating that the SYSEX message has been sent from AK-
5 Pro SE to the synthesizer
5. Your synthesizer is ready to play the Bayati makam.
Note: Pressing CANCEL/POWER will reset your synthesizer detuning to 0 Cents. All selected notes LEDs
will be turned Off.
2. Universal Mode
In Universal Mode, the AK-5 Pro sends Pitch Bend midi data to detune your instrument. You may have
to adjust the Pitch Bend range to two. (Refer to your keyboard/ synthesizer Owner's Manual).
Mode 1 (Fine Tune): Incoming notes will be routed and sent to a selected channel PC or SC.
29
AK-5 Pro SE/VERSION 4
www.kelfar.net
Operating the AK-5 Pro
Notes (C-B)
Copyright © 2005-20 Kelfar Technologies
Advertisement
Table of Contents
