Table of Contents
Advertisement
4. Press CANCEL to Select the MIDI CHANNELS by using the following buttons: (C to B) 1CH
to 12CH, Tune/Setup 13CH, TR (-) 14CH, RESET 15CH, TR (+) 16CH.
The LED Display shows SCH
5.
5. Press Cancel to setup the Control Change
The LED Display shows CCn
6. Press CANCEL to setup the Control Change.
The LED Display shows Cxx (xx=00 to 119) or UL (Master Volume) i.e C11
7. Select the Control Change Number by using the Transpose/Adjust buttons.
8. Press CANCEL to setup the Curvature by using the Transpose/Adjust buttons.
The LED Display shows Cux (x=0 to 8)
9.
8. Select the Curve by using the Transpose/Adjust buttons.
10.
9. Press CANCEL to Exit programming the Secondary Instrument (MIDI2).
11.
10. Press CANCEL to Exit programming the Secondary Instrument (MIDI2).
The LED Display shows FP (Fully PROGRAMMED)
After displaying FP the AK-5 Pro reboots indicating successful programming by displaying the
initial setting and Viewing Instrument Selections.
AK-5 Pro SE/VERSION 4
www.kelfar.net
Copyright © 2005-20 Kelfar Technologies
52
Advertisement
Table of Contents
