Inserting The Wireless Card - Panasonic PT-LB10NTU Operating Instructions Manual

(PT-LB10NTU only)
Wireless card
# Connector
This connector is for connecting the wireless card to the projector's card
slot. Be careful not to touch the connector.
$ Wireless card access indicator
Flashes while the projector is being accessed with personal computers by
means of a wireless network.

Inserting the wireless card

Insert the wireless card before using the PT-LB10NTU.
The card lock is already installed at the factory default setting. When you
insert the wireless card, first remove the card lock fixing screw using the
hexagon wrench to release the card lock.
Hexagon wrench
(accessory)
Card lock
$
B When removing the wireless card, unlock the card lock, and then pull out
the wireless card.
Downloaded From projector-manual.com Panasonic Manuals
18-E
NGLISH
#
Card lock fixing
screw
%
#
$
(PT-LB10NTU only)
# Insert the wireless card until it
locks.
$ Set the card lock.
% Fasten the card lock with the card
lock fixing screw using the
hexagon wrench.