Key Operator Setting; Key Operator Tools List - Gestetner 2045 Fax Manual

9. Key Operator Setting

Key Operator Tools List

You can program, change, or delete standard messages and auto documents.
You can also set the line type for the machine connection, register various IDs
(including a Polling ID), fax destinations, and many other items. In addition, you
can check the number of documents transmitted and received.
Function name
Programming, changing, and
deleting standard messages
Programming, changing, and
deleting auto documents
Programming, changing, and
canceling scan sizes
Printing a Journal
Transmission Page Count
Forwarding
Memory Lock Reception
ECM
Parameter Setting
Program Special Sender
Description
You can program, change, or
delete standard messages
printed at the top of the first
page of each incoming mes-
sage.
You can program, change, or
delete pages stored as auto
documents.
You can program, change, or
cancel frequently used scan
sizes.
Prints a Journal.
Checks the transmission and
reception, and totals on the
display.
Transfers received messages
to a registered receiver (for-
warding destination).
Switches the Memory Lock to
on or off. To use it, register an
ID for printing a message re-
ceived in Memory Lock mode.
If part of the transmission fails
due to a telephone line fault,
this function resends the
failed part automatically.
Allows you to change and
print the function settings to
meet your needs.
By registering particular re-
ceivers as Special Sender in
advance, you can have Special
Senders treated differently.
Reference
p.137 "Programming, Chang-
ing, and Deleting Standard
Messages"
p.137 "Programming, Chang-
ing, and Deleting Standard
Messages"
p.140 "Programming and
Changing a Scan Size"
p.142 "Printing the Journal"
p.142 "Counters"
p.143 "Forwarding"
p.145 "Memory Lock"
p.146 "ECM"
p.147 "Changing the User Pa-
rameters"
p.155 "Programming/Chang-
ing Special Senders"
135