Setting A User Code For Viewing Received And Stored Documents - Gestetner 2045 Fax Manual

E E E E
Select [Print] or [Store], and then
press [OK].
Note
❒ To cancel your selection, press
[Cancel]. The display returns to
D
that of step .
F F F F
Press the { { { { User Tools/Counter} } } } key.
The initial display appears.
Setting a User Code for Viewing
Received and Stored Documents
You can view and print documents
received and saved on the hard disk
using a Web browser. Specify wheth-
er or not a user code is entered to
view saved documents. If you prefer
to use a user code, set one using a
maximum of eight digits.
Note
❒ This function is only available
when received documents are
saved on the hard disk. See p.172
"Storing or Printing Received Doc-
uments".
❒ You can set a user code with the
System Settings. See the General
Settings Guide.
❒ If the programmed user code has
been deleted using the Address
Book Management function under
System Settings, you cannot view
received and saved documents us-
ing a Web browser. Select [OFF] in
step E or reprogram a user code.
Using Key Operator Settings
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [Facsimile Features].
C C C C
Press [Key Operator Tools].
D D D D
Press [Stored RX File User Code Set-
ting].
E E E E
If you prefer to use a user code,
press [ON].
Note
❒ If you prefer not to use a user
code, proceed from step
❒ To cancel the selection, press
[Cancel]. The display returns to
D
that of step .
F F F F
Enter a user code (eight digits
maximum) using the number
keys, and then press [#
Note
❒ If you enter a wrong user code,
press [Clear] or the { { { { Clear/Stop} } } }
key, and then try again.
G
.
9
# ].
# #
173