Table of Contents
Advertisement
Solving Operation Problems
Important
❒ Do not turn off the main power
switch while the power indicator is
lit or blinking. If you do, the hard
disk and memory may be dam-
aged and failure could result.
❒ Turn off the main power switch be-
fore pulling out the plug. If you
pull out the plug with the switch
on, the hard disk and memory may
be damaged and failure could re-
sult.
❒ Make sure that 100% is shown on
the display before you unplug the
machine. If a lower value is shown,
some data is currently present in
memory.
❒ Right after a power failure, the in-
ternal battery needs to be suffi-
ciently recharged to guard against
future data loss. Keep the machine
plugged in and the main power
switch on for about one week after
the power loss.
-
-
-
- RDS (Remote Diagnostic
System)
If your machine has a problem, a
service representative can perform
various settings over the telephone
line from the service station.
10
If you want to use this function,
change the User Parameter. See p.147
"Changing the User Parameters"
(switch 25, bit 4).
176
Advertisement
Table of Contents
