Gestetner 2045 Fax Manual page 20

Simplifying the Operation
B B B B
Press the { { { { Program} } } } key.
C C C C
Press [Register].
D D D D
Select a program number in which
"*Not Programed" is shown.
Note
❒ If you make a mistake, press
[Cancel] and select a program
number again.
7
❒ When you change a Keystroke
Program, press [Store] after
pressing the program number
you want to change. If you
make a mistake, press [Do not
Store] and return to step
E E E E
Enter the program name, and then
press [OK].
The standby display appears.
Note
❒ If you make a mistake, press
[Backspace] or [Delete All], and
then try again.
❒ You should register the pro-
gram name.
❒ To cancel a registered program,
press [Cancel]. The display re-
turns to that of step
Reference
"Entering Text", General Settings
Guide
114
Registering a priority function using a
program
You can select whether or not the
function registered in program No. 1
will be set after the power is turned
on or the { { { { Clear Modes} } } } key is pressed.
After registering a function in pro-
gram No. 1, select [Program No. 1] for
[Change Initial Mode] on the Facsimile
Features menu. See p.130 "General
Settings/Adjustment".
Note
❒ For this purpose, program No.1
does not allow you to program
destinations, Polling Transmis-
sion, User Transmission, Store File,
Scan Area, resolution, Image Den-
sity and Send Stored-file functions.
Using a program
Note
❒ Using the program causes the pre-
vious settings to be cleared.
Example of executing a program
D
.
using Send Later with the fax
number "0123456789"
A A A A
Make sure that the machine is in
facsimile mode and the standby
display is shown.
❒ If the standby display is not
B B B B
Place the original.
D
. ❒ If you have no registered desti-
Note
shown, press the { { { { Facsimile} } } } key.
Note
nations or scan settings as pro-
grams, enter the fax number of
the destination and select the
scan settings you require.