Table of Contents
Advertisement
Key Operator Setting
Note
❒ You must select only the item
you want to program.
❒ If you select [Same as basic set-
tings], the settings will be the
same as [Reception Setting] (See
p.132 "Reception Setting".),
[Forwarding] (See p.143 "For-
warding".), and [Memory Lock]
(See p.145 "Memory Lock".).
❒ To cancel these settings, press
[Cancel]. The display returns to
that of step
Authorized RX (Authorized
Reception)
A Press [Authorized RX].
B Select [ON] or [OFF], and then
press [OK].
Forwarding
A Press [Forwarding].
B Select [ON] or [OFF].
9
If you select [OFF], proceed to
step D.
Note
❒ Selecting [Same as basic set-
tings] will result in the same
setting made for [Forwarding]
immediately under [Key Op-
erator Tools].
156
E
.
C Specify an end receiver.
D Press [OK].
E Press [OK].
If you select [Yes], the name of
the end receiver appears to the
right of "Receiver :".
Reception File Print Qty
A Press [Reception File Print Qty].
B Select [Number of Sets].
C Enter the print quantity using
the number keys, and then
press [OK].
Note
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key
before pressing [OK], and
then try again.
Advertisement
Table of Contents
