Dtp Input And Output Signals - Extron electronics DTP CrossPoint 108 4K Setup Manual

Equipment configurations —
• DTP CrossPoint 4K IPCP SA — Includes a stereo audio
amplifier and a built-in Extron IPCP Pro control processor
• DTP CrossPoint 4K IPCP MA — Includes a 70 V mono audio
amplifier and a built-in Extron IPCP Pro control processor
DTP CrossPoint 4K — Unamplified audio outputs only,
•
no IPCP Pro control processor
Depending on the matrix size, two or four video outputs are
scalable.
The switchers provide four mono microphone (mic)/line level inputs
that can be mixed with or across one or all audio outputs.
The IPCP models also feature the built-in Extron IPCP Pro control
processor, which has three local area network (AV LAN) Ethernet
ports, RS-232 and IR-based control, relays, and digital I/O controls
that can control and monitor a variety of external devices, such as
projectors and lights. The non-IPCP model has one Ethernet port.
The matrix switcher can be remotely controlled via an AV LAN port
(IPCP models) or LAN port (non-IPCP models), a serial port, or a
USB port connection using either the Extron Product Configuration
Software, DSP Configurator software, or the Simple Instruction Set
(SIS).

DTP Input and Output Signals

The DTP inputs and outputs are proprietary signals that are created
within any of the Extron DTP Extenders systems and transmitted
over a single shielded twisted pair (STP) or unshielded twisted pair
(TP) cable. STP cable is strongly preferred and recommended.
The DTP CrossPoint accepts DTP inputs from transmitting devices
such as the DTP T USW 333. Depending on the connected
transmitting model, it generates the DTP signal from a variety of
video and audio inputs, including HDMI, DVI, analog VGA, and
embedded and analog audio. The DTP signal can also include
bidirectional RS-232 and IR control signals from the connected
transmitting and receiving devices or inserted locally, on the DTP
CrossPoint switcher.
Depending on the technology of the transmitting or receiving
device, DTP 330 or DTP 230, the TP inputs and outputs can travel
up to 330 feet (100 meters) or 230 feet (70 meters) without a loss
of signal integrity.
DTP CrossPoint 4K Series • Introduction 3