Extron electronics DXP DVI Pro User Manual page 121

Set & View Ties — Consists of a matrix of input (rows) and output (columns)
selection buttons.
To create a tie using this screen:
1. Move the mouse over the matrix of input and output selection buttons. Click a
button to create a preliminary tie of the input and output associated with that
button (if they are not already tied) or a preliminary untie (if the input and output
P
are tied). A " " (for preliminary) appears on the button.
NOTES: If you lose track of the input and output associated with a specific
button, let the mouse rest over one of the tie buttons for a moment. A
field pops up (as shown in the
identifies the input and output for that button.
To tie an input to all outputs, click that input number, located at the left
of the matrix.
Take
2. Click the button to make the configuration changes or
abandon the changes.
Input Adjustments — Contains an
NOTE:
authorization is set to On (the default).
Output Adjustments — Contains an
To mute or unmute an output:
1. In the Signal Type section, select the signal that you want to mute by clicking the
Video Only Audio Only
,
selected signal type button:
Video & Audio
, amber.
Mute
2. Click the button to the right of the desired output number. The selected
button label changes to
signal type button selected in step 1.
To unmute an output, click its
the color fill is removed.
EDID Configuration — Contains the following:
Save Output 1 section:
User
the buttons (numbered
O
input.
EDID menus:
user-assigned), from which you can select the resolution and refresh rate to assign
to the input.
User Assigned
(If you select a
figure 113 on the previous
HDCP Authorization
AV Mute
button for each output.
Video & Audio
, or button. A color fill is added to the
Video Only
is filled with green,
Muted
and its background becomes the color of the
Muted
button. The button label changes to
User 1 User 4
through
page) that
Cancel
button to
check box for each input.
Audio Only
, red, and
Mute
and
115