Extron electronics DXP DVI Pro User Manual page 118

2. Access the DXP web pages.
Configuration
3. Select the
4. On the Configuration page, click the
Browse
5. Click the
6. Navigate to the folder where you saved the firmware upgrade file and select the file.
Figure 111. Choose File Window with a Firmware File Selected
CAUTION:
extension is not
extension could cause the DXP to stop functioning.
NOTE: The original factory-installed firmware is permanently available on the DXP
switcher. If the attempted firmware upload fails for any reason, the DXP
reverts to the factory-installed firmware.
Open
7. Click .
8.
uploading may take a few minutes.)
tab.
Firmware Upgrade
Upload
button.
Upload
button changes to
link on the left side.
.S19. Any other file
Uploading...
.
Upload
. (The
112