Emerson Rosemount 2160 Reference Manual page 40

Configuration
May 2022
4.4.2 Connect to device
Procedure
1. Connect a handheld communicator or a HART
2. Do one of the following:
4.4.3 Configure update rate
The update rate is the frequency at which a new measurement is transmitted over the
wireless network. The default update rate is 1 minute.
Prerequisites
Note
If the time between each update is too long, the high/low alerts may be triggered too late.
40
terminals as shown in Figure
Figure 4-4: Connect to Device
A. Communication terminals
B. Handheld communicator
C. HART modem
• AMS Wireless Configurator:
a. Start AMS Wireless Configurator.
b. Select View → Device Connection View.
c. Double click the device under the HART modem.
• Handheld communicator:
— Turn on the handheld communicator and connect to the device.
®
modem to the communication
4-4.
Reference Manual
00809-0100-4160
1 2 3
4 5 6
7 8 9
0
Reference Manual