Emerson Rosemount 2160 Reference Manual page 3

Wireless level detector
Hide thumbs Also See for Rosemount 2160:
Table of Contents

Advertisement

WARNING
Physical access
Unauthorized personnel may potentially cause significant damage to and/or misconfiguration of end users' equipment. This could
be intentional or unintentional and needs to be protected against.
Physical security is an important part of any security program and fundamental to protecting your system. Restrict physical access
by unauthorized personnel to protect end users' assets. This is true for all systems used within the facility.
CAUTION
The products described in this document are NOT designed for nuclear-qualified applications.
Using non-nuclear qualified products in applications that require nuclear-qualified hardware or products may cause inaccurate
readings.
For information on Rosemount nuclear-qualified products, contact your local Emerson Sales Representative.
CAUTION
Hot surfaces
The flange and process seal may be hot at high process temperatures. Allow to cool before servicing.
NOTICE
Power module considerations.
Each power module contains primary lithium/thionyl chloride batteries. Under normal conditions, the battery materials are self-
contained and are not reactive as long as the batteries and the pack integrity are maintained. Care should be taken to prevent
thermal, electrical or mechanical damage. Contacts should be protected to prevent premature discharge.
Battery hazards remain when cells are discharged.
Use caution when handling the power module. The Power Module may be damaged if dropped from heights in excess of 20 ft. (6
m).
Power modules should be stored in a clean and dry area. For maximum battery life, storage temperature should not exceed 86 °F
(30 °C).
The power module may be replaced in a hazardous area. The power module has surface resistivity greater than one gigaohm and
must be properly installed in the wireless device enclosure. Care must be taken during transportation to and from the point of
installation to prevent electrostatic charge build-up.
NOTICE
Shipping considerations for wireless products.
The unit was shipped to you without the power module installed. Remove the power module prior to any re-shipping.
Each Black Power Module (model number 701PBKKF) contains two "C" size primary lithium batteries. Primary lithium batteries
(charged or discharged) are regulated in transportation by the U. S. Department of Transportation, and are also covered by IATA
(International Air Transport Association), ICAO (International Civil Aviation Organization), and ARD (European Ground
Transportation of Dangerous Goods). It is the responsibility of the shipper to ensure compliance with these or any other local
requirements. Consult current regulations and requirements before shipping.
Each Blue Power Module (A0701PBU) contains two "D" size primary lithium batteries. Primary lithium batteries (charged or
discharged) are regulated in transportation by the U.S. Department of Transportation, and are also covered by IATA (International
Air Transport Association), ICAO (International Civil Aviation Organization), and ARD (European Ground Transportation of
Dangerous Goods). It is the responsibility of the shipper to ensure compliance with these or any other local requirements. Please
consult current regulations and requirements before shipping.
3

Advertisement

Table of Contents
loading

Table of Contents