Configuration Procedure; Get Started With Your Preferred Configuration Tool - Emerson Rosemount 2160 Reference Manual

Configuration
May 2022
4.2

Configuration procedure

Follow these steps for proper configuration:
Procedure

1. Get started with your preferred configuration tool.

2. Join device to wireless network.
3. Configure device.
4. Verify the fork status (dry or wet) is as expected.
4.3 Get started with your preferred configuration
tool
4.3.1 AMS Wireless Configurator
The AMS Wireless Configurator is the recommended software tool for the wireless
network devices, and is supplied with the Emerson Wireless Gateway.
Configuration can be done by connecting to the wireless network devices either point-to-
point using a HART modem as shown in
shown in
done point-to-point.
34
• AMS Wireless Configurator
• Handheld communicator
a) Insert the power module.
b) Connect to device.
c) Configure update rate.
d) Obtain network ID and join key.
e) Enter network ID and join key.
f) Verify device joins Network.
a) Connect to device.
b) Configure using basic setup.
c) Consider optional guided setups.
Figure 4-2. Initial configuration to join a device to the wireless network must be
Figure 4-1, or wirelessly through the Gateway as
Reference Manual
00809-0100-4160
Reference Manual