Emerson Rosemount 2160 Reference Manual page 36

Configuration
May 2022
2. Go to Start → Programs → AMS Device Manager and select Add Device Type.
3. Browse to the downloaded DD files and select Ok.
Need help?
In the Add Device Type application, select the Help button for more information on how to
complete this operation.
Configure the HART
Before connecting to the device using a HART modem, the HART modem interface must
be configured in AMS Wireless Configurator.
Procedure
1. Close AMS Wireless Configurator.
2. Go to Start → Programs → AMS Device Manager and select Network
3. Select Add.
4. In the drop down list, select HART modem and then select Install.
5. Follow the on-screen instructions.
Need help?
In the Network Configuration application, select the Help button for more information on
how to complete this operation.
Configure the wireless network interface
Before connecting to the device wirelessly using a Wireless Gateway, the wireless network
must be configured in AMS Wireless Configurator.
Procedure
1. Close AMS Wireless Configurator.
2. Go to Start → Programs → AMS Device Manager and select Network
3. Select Add.
4. In the drop-down list select Wireless Network and then select Install.
5. Follow the on-screen instructions.
Need help?
In the Network Configuration application, select the Help button for more information on
how to complete this operation.
4.3.2 Handheld communicator
This section describes how to prepare the handheld communicator to communicate with
a Rosemount 2160. The handheld communicator can be used to configure the device with
a point-to-point connection. Connect the leads on the handheld communicator to the
communication terminals of the device.
36
®
Configuration.
Configuration.
modem interface
Reference Manual
00809-0100-4160
Reference Manual