Printing A Secure Fax; Sending A Fax Manually - Xerox VersaLink C505S User Manual

9. To save the settings, touch OK.
10. For the new settings to take effect, press the Home button, then at the prompt, touch
Restart Now.

Printing a Secure Fax

When the Fax Secure Receive option is enabled, all faxes that the device receives are
held in the Jobs list until you enter a passcode. After you enter the passcode, the faxes
are released and printed.
Note
Before you can receive a Secure Fax, ensure that the Secure Fax Receive feature is
enabled. For details, refer to the System Administrator Guide at
www.xerox.com/office/VLC505docs.
To print a secure fax:
1. At the printer control panel, press the Home button, then touch Jobs.
2. Touch Personal & Secure Jobs.
3. Touch your assigned private folder.
4. Enter your passcode, then touch OK.
5. Select a job to print, or touch Print All.
6. To return to the Home screen, press the Home button.

Sending a Fax Manually

You can use the Manual Send feature to enable the fax modem speaker temporarily.
This feature is helpful to dial international numbers, or to use phone systems that require
you to wait for a specific audio tone.
To send a fax manually:
1. At the printer control panel, press the Home button, then touch Fax.
2. Touch Manual Send.
Note
To display the menu without entering a fax number, at the top of the screen, touch
Fax.
3. Adjust the fax settings as needed.
4. Touch Dial, then enter a fax number using the touch screen keypad.
5. To send the fax, touch Scan.
6. If you are scanning from the document glass, when prompted, do one of the following
steps:
• To complete the job and return to the Fax app, touch Done.
• To scan another page, load a new original document on the document glass, then
touch Add Page.
• To delete the scan and return to the Fax app, touch Cancel, then touch Delete.
Note
If you are scanning a document from the automatic document feeder, a prompt
does not appear.
Xerox ® VersaLink ® C505 Multifunction Printer
User Guide
®
Xerox Apps
4-39