Cool Wall Installation/Cool Wall Conversion - Regency Grandview G800C-1 Manual

installation

Cool Wall installation/Cool Wall Conversion

1. Remove six (6) screws to remove top panel.
2. Remove insulation from top of unit and discard.
f i r e - p a r t s . c o m
3. Slide out tab as shown to remove—recycle part.
20 | Grandview G800C-1 Gas Fireplace
®
4. Insert a large slotted screwdriver into the slot in between front and back
tabs—bend the three (3) tabs up 90° towards the front.
DO NOT REMOVE TABS
5 . Bend the rear three (3) tabs up 90° towards the back of the unit.
6. Flip top panel 180° and reinstall to top of unit with four(4) screws in loca-
tions shown below.