Nailing Flange Installation - Regency Grandview G800C-1 Manual

Nailing Flange Installation

3. Screw one screw into the rear hole on each Side Nailing Flange.
4. Install the Top Nailing Flange with 4 screws.
5. Slot the Standoff Deflector onto the back screws, then secure the with a screw through the
remaining front hole on each flange.
f i r e - p a r t s . c o m
CLEAN FRONT
Backing Material (Drywall etc.)
Flush Finishing Material
Finishing Material
Top Nailing Flange
Standoff Deflector
OUTSIDE FINISH
*Distance to
combustible materi-
al varies with install*
Total Material
Maximum Depth: 1-1/4"
installation
Backing Material (Drywall etc.)
Finishing Material
Grandview G800C-1 Gas Fireplace |
®
41