Displaying, Editing Regional Operating Area Status - Furuno FA-100 Operator's Manual

4. Press the [1] key to show the VIEW CHANNEL display.
5. Press the [MENU] key to close the display.
1.11.2

Displaying, editing regional operating area status

You may display the status of regional operating areas currently memorized in
the equipment. Nine of any combination of AIS message from shore-based AIS,
DSC message, manual settings and commands from ECDIS or a PC may be
registered and one will be a default value.
About registering areas
AIS and DSC messages registered within last two hours cannot be edited.
An item labeled DEFAULT cannot be registered. ("DEFAULT" are data used
for international waters not controlled by shore-based AIS.)
If two areas overlap one another the oldest data is deleted.
Data older than five weeks is deleted.
Area data is deleted when it is more than 500 miles from the area for which it
was registered.
1. Press the [MENU] key to open the menu.
2. Press the [6] key to open the SYSTEM SETTINGS sub-menu.
3. Press the [2] key to choose SET CHANNEL.
4. Press the [2] key to open the CHANNEL EDIT sub-menu.
SELECT NO.: File number, 1-9. In order of distance from own ship,
TIME:
MMSI:
[VIEW CHANNEL]
Power
POWER : 12.5W
CHANNEL NO.
CH-A: 2087
Channel
CH-B: 2088
VIEW CHANNEL display
[CHANNEL EDIT]
SELECT NO. 1
TIME:
- -/- - - - -: - -
FROM
MMSI: DEFAULT
TYPE: DEFAULT
EDIT : [ENT]
CHANNEL EDIT sub-menu, page 1
from closest to furthest.
Data and time equipment controlled by external source.
MMSI displayed for control by DSC or shore-based AIS.
Dashes or "EMPTY" (no data) otherwise.
1 OPERATION
23