Appendix; Menu Tree - Furuno FA-100 Operator's Manual

APPENDIX

Menu Tree

Default settings in bold italics.
[MENU] key 1 TARGET DATA
2 PLOTTER
3 OWN DATA
4 SET MSG
5 INIT SETTINGS
(Continued on next page.)
1 OWN STATIC DATA
OWN STATIC DATA 1 (Name, call sign, MMSI, IMO no.)
OWN STATIC DATA 2 (Destination, estimated date and time of arrival)
OWN STATIC DATA 3 (DTE, nav status)
OWN STATIC DATA 4 (CPA, TCPA, GPS antenna position)
OWN STATIC DATA 5 (Crew, type, class)
2 OWN DYNAMIC DATA (Own ship latitude, longitude, SOG, COG, ROT, HDG)
3 ALARM STATUS (Displays alarm log.)
4 SENSOR STATUS
5 INTERNAL GPS (Shows position, SOG, COG, time, date, mode, reveiver status.)
1 CREATE MSG
1 SET MSG TYPE
ADDRESS TYPE (ADDRESS-CAST, BROADCAST)
MMSI
MSG TYPE (NORMAL, SAFETY)
CHANNEL (CH-A, CH-B, A OR B)
2 SET MSG
3 SEND MSG
2 XMIT MSG(S)
3 RCVD MSG(S)
1 SET SHIP DATA (NAME, CALL SIGN, DRAUGHT, DTE)
2 SET DESTINATION (DATE, TIME, DESTINATION)
3 SET NAV STATUS
4 SET TYPE&CREW
CREW (0-8191, 0)
TYPE CLASS (A, B)
TYPE NO. (Set ship type. See page 8.)
5 SET CPA/TCPA
CPA (0-6.00 nm)
TCPA (0-60 min)
ACTV (ENBL, DSBL)
6 SET ANTENNA POS
1 INTERNAL ANT POS
A (0-511 m, 0)
B (0-511 m, 0)
C (0-63 m, 0)
D (0-63 m, 0)
2 EXTERNAL ANT POS (Same items as 1 INTERNAL ANT POS.)
AP-1