Setting And Adjustment; Setting Mmsi Imo No., Name And Call Sign - Furuno FA-150 Installation Manual

3. SETTING AND ADJUSTMENT

After installing the equipment, set up the own ship's static information (MMSI, IMO
number, ship's name, call sign, type of ship and GPS antenna position). Also, set
up the I/O ports.
3.1 Setting MMSI, IMO No., Name and Call Sign
1. Press the [MENU] key to open the main menu.
2. Press on the cursor pad to choose INITIAL SETTINGS and press the [ENT]
key. The following password entry window appears.
3. Enter the password. The INITIAL SETTINGS window appears. Note that the
password is known by only the FURUNO dealer.
Note that if the password is wrong, "VIEW" is displayed in stead of "SET" in the
figure above.
18
[MENU]
MSG
SENSOR STATUS
INTERNAL GPS
USER SETTINGS
INITIAL SETTINGS
CHANNEL SETTINGS
DIAGNOSTICS
[ENTER PASSWORD]
Password entry window
[INITIAL SETTINGS]
SET MMSI SET MMSI
SET INT ANT POS.
SET EXT ANT POS.
SET SHIP TYPE
SET I/O PORT
QUIT [MENU]