Specifications - Furuno FA-100 Operator's Manual

SPECIFICATIONS OF THE U-AIS TRANSPONDER FA-100
The AIS shall improve the safety of navigation by assisting in the efficient navigation of ship's,
protection of the environment, and operation of Vessel Traffic Services (VTS), by the functions of
collision avoidance, ships' and cargo's information obtaining, and traffic management.
1 GENERAL
1.1 Display
1.2 TX/RX Frequency
1.3 Output Power
1.4 Impedance
1.5 DSC Receiver
1.6 Band Width
2 TRANSPONDER UNIT
2.1 CPU
2.2 ROM
2.3 Menu
3 GPS RECEIVER
3.1 Receiving Channels
3.2 Rx Frequency/ Rx Code 1575.42 MHz, C/A code
3.3 Position Fixing System All in view, 8-state Kalman filter
3.4 Position Accuracy
3.5 Tracking Velocity
3.6 Position-fixing Time
3.7 Position Update Interval 1 second
3.8 DGPS Data Receiving
4 INTERFACES
4.1 Sensor 1/ 2/ 3
Input:
4.2 PC I/O, EXTRA1, LR or ECDIS/RADAR
Input:
Output:
4.3 Alarm
4.4 LAN (10base-T)
Monochrome STN-LCD, 60 (H) x 95 (W) mm, 120 x 64 dots
156.025 MHz to 162.025 MHz
2 W/ 12.5 W or 0W exchangeable
50 ohms
CH70 fixed, 156.525 MHz, G2B, 1200 bps
25 kHz/ 12.5 kHz
SH7709A, 76.0 MHz
Flash ROM 1 MW
Target data/ Plotter/ Own data/ Set MSG/ Init Settings/
System Settings/ Diagnostics
12 channels parallel, 12 satellites tracking
Approx. 10 m, 95% of the time, (HDOP
DGPS: approx. less than 5 m, 95% of the time
900 kts
Warm start: 12 seconds, Cold start: 90 seconds
RTCM SC-104 Ver 2.1 formatted
IEC 61162-1(2000-07)/61162-2(1998-09)
DTM, GNS, GLL, GGA, RMC, VBW, VTG, OSD, HDT, GBS,
ROT (GN>GP>GL>LC)
IEC 61162-1(2000-07)/61162-2(1998-09)
VSD, SSD, ABM, BBM, ACA, ACK, AIR, DTM, GBS, GGA, GLL,
GNS, HDT, LRF, LRI, OSD, RMC, ROT, VBW, VTG
VDM, VDO, ABK, ACA, ALR, TXT, LR1, LR2, LR3, LRF, LRI
Contact Closure
IEC61162-4
SP-1
4)
E4417S01G