Finding Dangerous Ship's Data - Furuno FA-100 Operator's Manual

1 OPERATION
1.8.2

Finding dangerous ship's data

You can easily find dangerous ships whose CPA and TCPA are lower than the
preset CPA and TCPA values set on the INIT SETTINGS menu.
1. Press the [MENU] key to open the menu.
2. Press the [1] key to choose TARGET DATA.
3. Press the [SFT/ +/-] key to show the DANGEROUS SHIPS display.
Target's name, and
CPA and TCPA
4. To find a dangerous target's details, choose it using the [▲] or [▼] key and
then press the [ENT] key. The data format is the same as that shown on the
previous page.
5. Press the [MENU] key several times to return to the main menu.
Note: The message "LOST" appears at the top of the DANGEROUS SHIPS
display when no AIS signal is received from the selected target.
14
[DANGEROUS SHIPS]
n
NAME CPA( ) TCPA
m
BOUNTY 0.2 2:00
SEADOG 1.0 2:30
DTLS: [ENT] 1/
Dangerous ships display
Target no. selected,
2
no. of dangerous targets