Remarks On Menu Operation - Furuno FA-100 Operator's Manual

1.4.2

Remarks on menu operation

Confirming entry
If, after you have changed data, you pressed the [MENU] key without pressing
the [ENT] key, the message shown below appears. If you want to cancel the
data, press the [ENT] key. If you wish to save, use the [▼] key to choose NO,
press the [ENT] key and then press the [ENT] key again.
Choosing data input mode
To enter a specific numeric, alphabet or symbol, choose the appropriate data
input mode, numeric or alphabet. The active data input mode is shown at the
bottom left-hand corner of the screen. Use the [SFT/ +/-] key to select desired
mode. To enter a numeric, simply press appropriate numeric key. For alphabet
or symbol, press appropriate key until desired character or symbol appears.
CANCEL?
YES
NO +/-
"Are you sure" confirmation dialog
Data Input Mode
123: Numeric
ABC: Alphabet
Use the [SFT/ +/-] key
to switch modes.
SET MSG screen
[SET MSG]
123 0/150
1 OPERATION
5