Specifications - Furuno FA-170 Operator's Manual

FURUNO
SPECIFICATIONS OF U-AIS TRANSPONDER
1 TRANSPONDER UNIT
1.1 TX/RX frequency
1.2 Class of emission
1.3 Output power
1.4 Impedance
1.5 DSC receiver
1.6 Bandwidth
2 MONITOR UNIT
2.1 Screen
2.2 Brilliance control
2.3 Visible distance
2.4 Buzzer volume
3 GPS RECEIVER
3.1 Receiving frequency
3.2 Tracking code
3.3 Number of channel
3.4 Accuracy (dependent on ionospheric activity and multipath)
GPS
DGPS
3.5 Tracking speed
3.6 Position fixing time
3.7 Position update interval 1 second typical
3.8 DGPS data receiving
4 INTERFACE
4.1 Number of ports
Serial
Sensor input
Alarm I/O
LAN
BLUESIGN input
4.2 Data sentences
Input
FA-170
156.025 MHz to 162.025 MHz
F1D, F2B
1 W or 12.5 W selectable
50 ohms
CH70 fixed, 156.525 MHz
25 kHz
4.3-inch color LCD, 480 x 272 dots (WQVGA)
18 steps
0.7 m nominal
75 to 85 dB (A)
1575.42 MHz
C/A code
12 channels parallel, 12 satellites
13 m max. (2drms HDOP < 4)
5 m max. (2drms HDOP < 4)
1000 kn
Warm start: 12 s, Cold start: 90 s
RTCM SC-104 ver-2.1
6 ports, IEC61162-1 Ed.4 or IEC61162-2 Ed.1
3 port, IEC61162-1 Ed.4, 4800 bps
1 port, Contact closure (normal close or open),
Output level: 50 V, 80 mA max.
1 port, Ethernet, 100Base-TX, RJ45 connector, Auto MDI/MDIX,
for IEC61162-450 Ed.1
1 port, Relay contact
IEC61162-1/2/450
ABM, ACA, ACK, ACM, ACN, AIQ, AIR, BBM, DTM, EPV, GBS,
GGA, GLL, GNS, HBT, HDT, LRF, LRI, OSD, PIWWIVD,
PIWWSPW, PIWWSSD, PIWWVSD, RMC, ROT, SPW, SSD, THS,
VBW, VSD, VTG
SP - 1
FA-170
E4490S01G
160415