Table of Contents
Advertisement
3
PANEL DESCRIPTIONS
■ ID-RP2C
(Front panel)
q POWER SWITCH [POWER]
Push to turn ON the power.
The LED indicator located at right lights when the
power is turned ON.
■ ID-RP2C
(Rear panel)
q POWER CONNECTORS
[LOCAL RPT— DC13.8V OUT] (p. 7)
Outputs 13.8 V DC for local repeater.
Connects the ID-RP2D/V with the supplied DC
power cable
(OPC-1309; supplied with the ID-RP2D/V)
The same voltage as the supplied voltage to
[DC13.8V IN] connector is output regardless of the
[POWER] switch condition on the front panel.
w [LOCAL RPT— CONT I/O] (p. 7)
Input/output ports for local repeater to received or
transmitted serial data routing.
Connects the ID-RP2D/V with the supplied control
cable
(supplied with the ID-RP2D/V)
q
w
q
.
w 10BASE-T CONNECTOR [10BASE-T] (p. 24)
Connects a PC with LAN cable to set the details of
the repeater site, such as the call sign, IP address.
A Gateway server can also be connected to this
connector.
w
e POWER CONNECTOR [DC 13.8V IN] (p. 7)
DC power input connector for the ID-RP2 system.
Connects a 13.8 V DC power supply unit with the
DC power cable
.
RP2C)
.
r GROUND TERMINAL [GND] (p. 10)
Connects to a ground to prevent electrical shocks,
TVI, BCI and other problems.
3
e r
(OPC-1380; supplied with the ID-
Advertisement
Table of Contents
