D Microsoft Windows 7 - Icom ID-RP2C Instruction Manual

5
DRIVER INSTALLATIONS
■ Checking the COM port— continued
D Microsoft ® Windows
q Start Windows.
• When opening the Device Manager, log in as the admin-
istrator.
w Connect the PC and the ID-RP2D [SERVICE] con-
nector with the USB cable.
e Move the mouse pointer at the left-bottom corner of
the desktop.
Click the Windows "START" icon, right-click "Com-
puter" in the <Start> menu, and then click "Proper-
ties."
w Right-click
q Click
r The "Control Panel Home" window will appear.
Click "Device Manager."
• The "Device Manager" window appears.
Click
® 7
e Click
t Double-click "Ports (COM&LPT)" on the "Device
Manager" screent o check the COM port number.
• When the driver is completely installed, "ICOM ID-RP2D
SERVICE (COMM)" is displayed. The screen shows the
USB serial COM port number "4."
• The COM port number is displayed instead of "
If the repeater has two COM ports, two COM port
numbers are displayed.
• Depending on the PC environment, the COM port
number may differ.
• If "!" or "×" is displayed on the "Device Manager"
screen, the driver may not be properly installed. In
this case, first uninstall the USB driver, then rein-
stall it.
15
Double-click
."
M