Table of Contents
Advertisement
5
DRIVER INSTALLATIONS
Use an A-B type USB (Universal Serial Bus) cable be-
tween the ID-RP2 and your PC. So, the USB driver
installation is required for the PC.
In addition, individual USB driver installations are re-
quired for each connector, because the communica-
tion port numbers are different.
The instruction that follow describe the installation of
the ID-RP2D [SERVICE] connector as an example.
®
■ Microsoft
Windows
q Start Windows.
• Quit all other applications if any are running.
• When installing the driver, log in as the administrator.
w Insert the CD that is supplied with the ID-RP2C (Ap-
plication CD) into the CD drive.
• If you downloaded the USB driver, skip this step and go
to the next step.
e Connect the PC and the ID-RP2D [SERVICE] connec-
tor with an A-B type USB cable (User supplied).
r Move the mouse pointer to the bottom left corner of
the desktop.
Move the mouse pointer
around here.
t Right-click the Microsoft icon, and then click "Device
Manager."
Right-click
®
8.1
Click
IMPORTANT!
A different USB driver from the ID-1 is used for the
ID-RP2 system.
Uninstall the USB driver for ID-1 first, then install
the USB driver for the ID-RP2 system, if the USB
driver for the ID-1 is installed in the PC.
NOTE:
The repeater unit connection may not be recognized
by the PC if the USB cable is too long. Use as short
a USB cable as possible.
y The "Device Manager" window appears, then make
sure a warning symbol " " is displayed, as shown
below.
NOTE: Although the warning symbol " " indicates that
the driver installation has failed, continue the proce-
dure.
9
Advertisement
Table of Contents
