Installing The Utility Software; Installing - Icom ID-RP2C Instruction Manual

Digital repeater system

Hide thumbs

Table Of Contents

Table of Contents

The utility software is used to set call signs and

operating frequencies.

Separate utility software for each ID-RP2 unit, ID-

RP2C, ID-RP2D, and ID-RP2V is available.

This section describes installing the utility software

for the ID-RP2C as an example.

And also this section is based on using Microsoft

Windows

7. The displayed screens, indications or

operations may slightly differ from the instructions,

depending on your system configuration or

Windows operating system.

NOTE:

The ID-RP2C boxed with this instruction

manual requires the utility software revision 2.2 or

later. The utility software revision 2.0 or earlier is

not compatible.

■ Installing

q Start Windows.

• Quit all other applications if any are running.

• When uninstalling the driver, log in as the administrator.

w Insert the CD that is supplied with the ID-RP2C (Ap-

plication CD) into the CD drive.

e Click "Computer" and then display the contents of

the CD.

r Double click "IDRP2C" folder.

• Contents of the folder are displayed.

Double click

t Double click "Setup.exe" file.