Table of Contents
Advertisement
6
INSTALLING THE UTILITY SOFTWARE
■ Installing— continued
i The "Choose Destination Location" screen ap-
pears.
• When installing the Utility software at the displayed loca-
tion, click [Next>].
• When installing to a different location, click [Browse...],
select the desired location and then click [Next>].
o Starts the Utility software installation.
!0 The "InstallShield Wizard Complete" screen appears
when the installation is finished.
• Click [Finish] to complete the installation.
!1 Eject the CD from the CD drive, then reboot the
PC.
Click
Click
19
NOTE: After installing the utility, the short cut icon
will automatically be created on the desktop.
When the icon looks like white square, right-click on
the desktop, and then click "Refresh," or, reboot the
PC.
NOTE: Install the utility software for the ID-RP2V
and the ID-RP2D in the same manner.
Advertisement
Table of Contents
Need help?
Do you have a question about the ID-RP2C and is the answer not in the manual?
Questions and answers