Table of Contents
Advertisement
setparam #### #
Sets new value for parameter. ID consists of 4 digits – first digit identifies profile, second, third and
fourth identifies parameter ID as described in Parameter List chapter. In value field a new parameter
value is entered.
Example: 'setparam 1245 127.0.0.1' will change configured IP address in profile1 with new value
flush #,#,#,#,#,#,#
Initiates all data sending by GPRS to specified target server. Comma separated parameters go as
numbered:
1.# - IMEI
2.# - APN
3.# - GPRS LOGIN
4.# - GPRS PASSWORD
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
Parameters are separated by comma (no spaces needed). In case you don't need to enter parameter
(Login/Pass) – do not put space, simply put comma and write next parameter.
Example: opa opa flush 353976012555151,banga,,,212.47.99.62,12050,0
Response details
FLUSH SMS Accepted
# records found on FLASH
Minimum Records to Send: #
GPRS Enabled: #
Time Sync: #
Example: FLUSH SMS Accepted. 11 records found on FLASH. Minimum Records to Send: 1. GPRS
Enabled: 1. Time Sync: 1.
Description
FLUSH SMS Accepted
Number of records found on FLASH
Number of minimum saved records to send
State of the GPRS connection, 0 – disabled;
1 – enabled
Indicates time synchronization on the device,
0 – not synchronized; 1 – synchronized
33
Advertisement
Table of Contents
