Setparam; Flush - Teltonika FMB630 User Manual

Response details Description
ID Profile number and parameter ID
Value Parameter value
Example: 'getparam 240' command will request SIM1 APN.
14.18

setparam #### #

Sets new value for parameter. ID consists of 4 digits – first digit identifies profile, second,
third and fourth identifies parameter ID as described in Parameters Configuration chapter 6.3. In
value field a new parameter value is entered.
Example: 'setparam 240 internet' will change SIM1 APN with new value"internet"
For ignoring value and leave it as it was before "?" should be used.
14.19

flush #,#,#,#,#,#,#

Initiates all data sending by GPRS to specified target server. Comma separated parameters
go as numbered:
1.# - IMEI
2.# - APN
3.# - GPRS LOGIN
4.# - GPRS PASSWORD
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
Parameters are separated by comma (no spaces needed). In case you do not need to enter
parameter (Login/Pass) – do not put space, simply put comma and write next parameter.
Example: opa opa flush 353976012555151,banga,,,212.47.99.62,12050,0
Response details Description
FLUSH SMS FLUSH SMS Accepted
Accepted
# records found on Number of records found on FLASH
FLASH
Minimum Records Number of minimum saved records to send
to Send: #
GPRS Enabled: # State of the GPRS connection, 0 – disabled; 1 – enabled
Time Sync: # Indicates time synchronization on the device, 0 – not
synchronized; 1 – synchronized
r Example: FLUSH SMS Accepted. 11 records found on FLASH. Minimum Records to Send: 1. GPRS
Enabled: 1. Time Sync: 1.
Table 47 getparam####
Table 48 flush SMS
A
nswe
103