Advertisement
https://wiki.teltonika-gps.com/view/FM3001_First_Start
FM3001 First Start
Main Page
>
EOL Products
Advanced Plug and Track real-time tracking terminal with GNSS, 3G and Bluetooth
connectivity
Contents
1 How to insert Micro-SIM card
2 OBD II pinout
How to insert Micro-SIM card
1.
Gently remove FM3001 cover using plastic pry tool from both sides.
Insert Micro-SIM card as shown with PIN request disabled or read
2.
enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing
forward to slot.
3.
Connect battery as shown to device. Position the battery in place where it does not obstruct
other components.
4.
Attach device cover back.
5.
Device is ready to be connected.
Micro-SIM card insertion/removal must be performed when device is powered off –
external voltage and internal battery disconnected. Otherwise Micro-SIM card might be
damaged or device will not detect it.
OBD II pinout
>
FM3001
> FM3001 First Start
Security info
how to
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Teltonika FM3001
Summary of Contents for Teltonika FM3001
- Page 1 2.4 Quick SMS configuration 3 Safety information 3.1 Precautions How to insert Micro-SIM card Gently remove FM3001 cover using plastic pry tool from both sides. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator.
- Page 2 Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup. Configuration (Windows) At first FM3001 device will have default factory settings set. These settings should be changed according to the user's needs. Teltonika Configurator Main configuration can be performed via software.
- Page 3 Maintenance and etc. FM3001 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality: Load from device –...
- Page 4 If device has made a record it is sent to the server every 120 seconds After successful SMS configuration, FM3001 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator parameters.
- Page 5 The device is susceptible to water and humidity. Installation and/or handling during a lightning storm is prohibited. Teltonika is not responsible for any harm caused by wrong cables used for connection between PC and FMB1YX. WARNING! Do not use FMB1YX device if it distracts driver or causes inconvenience due to OBD II placement.
Need help?
Do you have a question about the FM3001 and is the answer not in the manual?
Questions and answers