Teltonika Telematics FM3622 Mounting Instructions
Hide thumbs
Also See for Telematics FM3622:
- User manual (106 pages) ,
- User manual (105 pages) ,
- Manual (4 pages)
Advertisement
Table of Contents
- 1 Installation Guide and Video
- 2 Tools and Items Needed for Installation
- 3 Disassemble Interior Trim to Find Fuse Box, Power Cable.
- 4 Connect Power Cable, Ground Cable, Optional Ignition Wire.
- 5 Check Device Functionality and Reassemble Dashboard.
- 6 Fasten Device Inside Dashboard, Connect Antennas and Cables.
- 7 Mounting Recommendations
- Download this manual
https://wiki.teltonika-gps.com/view/Teltonika_Vehicle_Telematics_device_mounting_instructions
Teltonika Vehicle Telematics device
mounting instructions
Main Page
>
Frequently Asked Questions - FAQ
Contents
1 Installation guide and video
2 Tools and items needed for installation
3 Open device casing to connect the internal battery and insert SIM card.
6 Thread external GNSS and GPRS antennas (if needed according to device model).
Installation guide and video
This page will guide you on how to mount a Teltonika Vehicle Telematics device properly, which is
an important procedure to allow the device to function correctly and effectively.
Embedded below is a short video showing the general steps to install Teltonika Vehicle Telematics
devices. The device in the video is an FM3622, but these steps can also be applied to most other
devices.
Note: Devices like the
FMB020, FMC001) have their own special simplified installation process, so this video does not
apply to them.
Tools and items needed for installation
Video timestamp
0:13
The tools and items needed to install a device are:
Pliers
Multimeter
Tool Set
Fasteners (e.g. zip-ties)
Quick wire splicing clips
SIM card
> Teltonika Vehicle Telematics device mounting instructions
FMT100
and FMB0XY series devices (FMB001, FMB002, FMB003, FMB010,
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Teltonika Telematics FM3622
Summary of Contents for Teltonika Telematics FM3622
- Page 1 8 Fasten device inside dashboard, connect antennas and cables. Installation guide and video This page will guide you on how to mount a Teltonika Vehicle Telematics device properly, which is an important procedure to allow the device to function correctly and effectively.
- Page 2 Video timestamp 0:25 Teltonika devices come with the internal backup battery disconnected (unless specially ordered), so before installation, you must open the device and connect the battery. While the device casing is open, insert the SIM card you will use with your device. Step-by-step instructions on how to open your device can be found in your device's wiki page, in the First Start section.
- Page 3 There are also Mounting Recommendations mentioned in the First Start guide for every Teltonika device. For example: https://wiki.teltonika-gps.com/view/FMB920_First_Start#Mounting_recommendations https://wiki.teltonika-gps.com/view/FMB120_First_Start#Mounting_recommendations https://wiki.teltonika-gps.com/view/FMB640_First_Start#Mounting_recommendations...
Need help?
Do you have a question about the Telematics FM3622 and is the answer not in the manual?
Questions and answers