Error List - WisyCom MCR42 User Manual

E
RROR LIST
When an error occurs, the receiver
A. shows a message on the display
and for some error types
B. increases the errors counter in the info menu
C. inserts the error type and code on the error list in the info menu
When the error is solved, the message on the display disappear, but the error information (code
and description) are available on the error list in the Info menu (only for some error, see the
below table).
NOTE : When the receiver is reset the error information (code and error type on the list) are lost.
1
Errors
Low voltage level
TX of RX1 Battery Low
TX of RX2 Battery Low
Rear panel error
Device ID copy1 invalid, Memory recovered
Device ID copy2 invalid
Memory recovered
RX1 copy1 invalid
RX1 copy2 invalid
RX2 copy1 invalid
RX2 copy2 invalid
PLL unlocked
CH mem header
Param mem header
Message on display
(A)
Battery Low / Ext pwr Low
TX1 Pwr Low
TX2 Pwr Low
BASE: Error
-
-
-
MCR41/MCR42 User Manual
Error type
(C)
MB mem copy 1
MB mem copy 2
RX1 mem copy 1
RX1 mem copy 2
RX2 mem copy 1
RX2 mem copy 2
PLL unlocked
CH mem header
Param mem header
Code
(C)
87
88
89
8A
89
8A
84
85
86
20