Advanced Menu - WisyCom MCR42 User Manual

Single-dual true diversity camera receiver

Hide thumbs Also See for MCR42:

Table of Contents

MCR41/MCR42 User Manual

Advanced Menu

Power on (only for MCR42, not MCR41)

Edit RX (MCR42 has the same menu for RX1 and RX2)

Edit RX: Name

Edit RX: GR-Ch

Edit RX: Frequency

Edit RX: Squelch

Allow to enable both the receivers:

Only receiver 1 (Rx1), only receiver (Rx2) or (Rx1 + Rx2).

Selecting this sub-menu most of RX1 or RX2 setups are

configurable.

Selecting Name, it's possible to edit the name of the receiver

(12 characters). The number of visible characters in the

parameter Name depends on the type of characters used

(uppercase or lowercase characters).

Select current group and channel.

Group name and channel frequency are displayed on the

right.

If the specific group/channel is not locked, then can be

edited in this menu.

This menu allows to disable the RF squelch (OFF) or to setup

the desired squelch level in dBµV (note 0 dBµV is equal to -

107 dBm).

Table of Contents