WisyCom MCR54 User Manual

Multi-band quad/dual true diversity camera receiver

Hide thumbs Also See for MCR54:

User manual (24 pages)

Quick user manual (2 pages)

Quick start manual (2 pages)

page of 32

/ 32
Bookmarks

Quick Links

Download this manual

MCR54 / MCR54-DUAL

User Manual

Multi-band

Quad/Dual True Diversity

Camera Receiver

rev.12 (reference FW 2.3.0)

Date: 28 June 2023

Need help?

Do you have a question about the MCR54 and is the answer not in the manual?

Questions and answers

Summary of Contents for WisyCom MCR54

Page 1 MCR54 / MCR54-DUAL User Manual Multi-band Quad/Dual True Diversity Camera Receiver rev.12 (reference FW 2.3.0) Date: 28 June 2023...
Page 2 MCR54 / MCR54-DUAL User Manual...
Page 3 MCR54 / MCR54-DUAL User Manual AFETY INSTRUCTION • Read this safety instruction and the manual first • Follow all instructions and information. • Do not lose this manual. • Do not use this apparatus under the rain or near the water.
Page 4 MCR54 / MCR54-DUAL User Manual AIN FEATURES MCR54 is a camera mount quad true diversity wireless-microphone receiver system in a modular stand-alone or slot-in configuration (compatible with most camera’s slot): • Wideband just isn’t enough anymore! Upgrade to a Multi-Band system with up 790 MHz tuning range to find your frequency, anywhere in the World.
Page 5 MCR54 / MCR54-DUAL User Manual One of the milestones in the design of the MCR54 is unprecedented reliability: most of the circuitry of the receiver is independent one from each other. Above a schematic with an overview of main receiver functions.
Page 6 MCR54 / MCR54-DUAL User Manual Audio Layout As shown on the above schematic, MCR54 provides the following audio signals: • HP [HEADPHONE]: an analog monitor audio output to headphone 3.5mm jack socket. Thanks to the “Setup>Headphone” menu the user can select which of the 4 receivers he wants to listen to and can adjust the volume from 0 to -24 step 1dB.
Page 7 During menu navigation push this button to move-down and select the previous item. ⓫ “Arrow up/SYNC” BUTTON Push and keep this button to start a synchronization with a Wisycom transmitter (follow instructions on display). Before starting synchronization IRDA must be enabled on Wisycom transmitter.
Page 8 MCR54 / MCR54-DUAL User Manual Display menu Using navigation buttons it is possible to quick & easy navigate through the menu: - SEL to enter a level or SAVE - EXIT to exit a level - Arrow up/down to circle on the same level...
Page 9 MCR54 / MCR54-DUAL User Manual From the single receiver page press SEL button to enter direct into the Frequency setup. Use the arrows to change the parameter (Channel/Group/ Frequency) and SEL to confirm and shift to the other parameter. NOTE: when the Channel is locked, the Frequency parameter is not editable.
Page 10 MCR54 / MCR54-DUAL User Manual Tree menu Active Load U01-Preset1/U02-Preset2/U03-Preset3…. U16-Preset16 Preset Save U01-Preset1/U02-Preset2/U03-Preset3…. U16-Preset16 Factory Edit RX1 Menu Edit RX2 Name/ Freq./ Ch. Mod./ Compand/ Sq. mode/ Audio/ Sync Edit RX3 Edit RX4 Settings Active RXs/ BT/ Audio Route/ Headphones/ Display/ Act. code/ Panel lock/ fn menu...
Page 11 Compander MCR54 supports 5 different types of “Compander systems” (others on request through Digicom): ENS: designed for voice and music applications. ENR-Wisy: designed for maximum noise reduction. Ideal for use in louder environments.
Page 12 NOTE: The compander of the receiver must be the same as the transmitter MCR54 core is a power digital audio processor that, besides an unbeatable audio quality and flexibility, can emulate most expanders systems on the market. On this menu you can setup the audio expanding chipset emulation.
Page 13 RF squelch to a much lower level. Tone Squelch MCR54 is able to detect a digital tone squelch generated by a Wisycom transmitter (ex. MTH410/MTH400/MTP40S/ MTP41S/MTB40S/RPU500). Tone squelch ON: when the tone squelch is enabled the audio is muted unless the correct carrier is detected.
Page 14 MCR54 / MCR54-DUAL User Manual It’s possible to select the audio level between -30 dB to 0 dB (referred to the maximum output level set on the audio outputs). It represents the reference of the peak deviation (56 KHz). The frequency of the tone can be chosen between 400/600/1000 Hz.
Page 15 Passcode: per impostare una password Reset: per resettare gli accoppiamenti bluetooth Audio Route MCR54 provides two audio output: Base & Top. Depending on the rear panel mounted it is possible to have different scenarios. Rear panels: ▪ BPA54: stand-alone rear panel;...
Page 16 MCR54 / MCR54-DUAL User Manual With IKSS it is possible to enable Digital outputs on TOP or BASE. If the outputs are digital it is possible to come out all the receivers with one connector while in analog mode TOP connector can comes out receivers (A1, A2) or (A3, A4) while BASE connector can only provide receivers (A1, A2).
Page 17 MCR54 / MCR54-DUAL User Manual Audio Route: MCR54-DUAL MCR54-DUAL provides two receivers and works the same as MCR54. For audio routing, the above tables modify as follows for each rear panel. BPA54: TOP output BASE#1 output BASE#2 output CHANNEL1+ CHANNEL1-...
Page 18 MCR54 / MCR54-DUAL User Manual Headphones This menu the user can select which of the 4 receivers he wants to listen to and can adjust the volume from 0 to -24 step 1dB. Display In this menu item it’s possible to set the mode of switch on of the front LEDs and the contrast and timeout of the display.
Page 19 Channels/ Freq. Button View Last The MCR54 allows the user to scan using the Group/Channel frequency file in the unit or by scanning a manual selection of frequencies. Select which type of scan by going into the scan menu. Channels...
Page 20 MCR54 / MCR54-DUAL User Manual Once started a channel scan operation the receiver asks for group to be used*. Press the SEL button to select the group to scan. Then it prompts to turn off all transmitters. This is in order to provide the most accurate scan data.
Page 21 MCR54 / MCR54-DUAL User Manual The Frequency scan allows to select a range of frequency to scan, between a maximum and a minimum value and the step with which to perform the scans. Press and hold the SEL button to confirm.
Page 22 Supply voltage measured (on the rear connector) 12.0 Volt Model Model of the device MCR54 The serial number composed by 8 numbers 10900174 Serial Frequency range according to the MCR54 band 470--960 Range (minimum and maximum frequency) BLACK Antenna Version of rear panel: BPA54...
Page 23 MCR54 / MCR54-DUAL User Manual ACCESSORIES AND PARTS BPA54: Stand alone socket Hirose HR10A-F CHANNEL1+ CHANNEL3+ CHANNEL1- CHANNEL3- +VDC CHANNEL2+ CHANNEL4+ CHANNEL2- CHANNEL4- SLK54-SX/SX2: Sony slot-in "Slot-in" kit (upper flange +rear-panel) for Sony camera. SUBD-15pin: CH1 Anal (unbalanced) CH2 Anal (unbalanced)
Page 24 MCR54 / MCR54-DUAL User Manual BCA54: Stand alone with lithium battery pack - 2 mini XLR-5pin male audio outputs - 1 Hirose connector for external power - Battery pack for RRC2040 33.2Whr lithium battery CABLES AF cable (50 cm), mini XLR-5F / 2 XLR-3M...
Page 25 (to MCR54/MCR42,Ikegami/Panasonic slot-in compatible) CAP52-IK 2 XLR-3M (line output isolated with audio tranformer) + hirose (for power supply) →MCR54 (2 analog audio outputs or 4 AES3 audio outputs) STAND ALONE HARNESS CABLE- DB15 to MCR54/MCR42, Sony slot-in compatible) CAP52-SX 2 XLR-3M (line output isolated with audio tranformer) + hirose (for power supply) →MCR54 (2 analog audio outputs)
Page 26 How to update the firmware: Connect the MCR54 to the PC through the USB-C cable Check if the version of Wisycom Manager installed in your PC is the latest version. If not, upgrade to the new version Run Wisycom Manager...
Page 27 MCR54 / MCR54-DUAL User Manual ONFORMITY FCC Conformity This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 28 MCR54 / MCR54-DUAL User Manual RAWING...
Page 29 USB C, Bluetooth 5 (long range) or optional UPKmini Programming LEDs 2 multicolour RGB LEDs to easy indicates Power & Bluetooth 4 multicolour RGB LEDs to easy indicates the audio status of the 4 RX (2 for MCR54-DUAL) Display OLED 128x64 (white) Powering - External = 5 ÷...
Page 30 MCR54 / MCR54-DUAL User Manual...
Page 31 MCR54 / MCR54-DUAL User Manual...
Page 32 MCR54 / MCR54-DUAL User Manual Wisycom Srl Via Tiepolo, 7/E 35019 Tombolo (PD) – Italy Email:sales@wisycom.com www.wisycom.com...

This manual is also suitable for:

Mcr54-dual