Console Cable; Table 2-20 Technical Specifications Of The Ot Terminal - Raisecom Gazelle S1020i-LI User Manual

Raisecom
Gazelle S1020i-LI (A) User Manual
Insulating sheath
Welding technology
Error in length of
conducting wire
Table 2-20 lists technical specifications of the OT terminal.

Table 2-20 Technical specifications of the OT terminal

Model
Technical specifications
Cross-sectional area of
the conducting wire



2.7.2 Console cable

Introduction
The Console cable is used to connect the Console interface of the Gazelle S1020i-LI to the
RS-232 serial interface of the console. It transmits configuration data signals. The console
locally debugs and maintains the Gazelle S1020i-LI through the Console interface.
Connector types of the Console cable are below:


Appearance
Figure 2-12 shows the RJ45 console cable.
Parameter
Parameter
The Gazelle S1020i-LI is delivered without the ground cable. If required, make the
ground cable on site according to technical specifications.
The ground cable cannot be longer than 30 m and should be as short as possible;
otherwise, a ground bar should be used instead.
RJ45 connector: connect the Console interface on the Gazelle S1020i-LI.
DB9 female interface connector: connect the serial interface on the console.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Halogen-free flame-retardant heat-shrink tubing. It is a 20
mm plastic tube which shrinks when being heated.
The conducting wire and OT terminals adopt solderless
pressed connection.
± 5 mm
Grounding round-pressed terminal (M6)/RoHS

4.3 soldering lug

Inner diameter of soldering lug: 6.4 mm
Outer diameter of soldering lug: ≤ 12 mm


Inner diameter of sheath: 3.4 mm
Thickness of soldering lug: ≥ 1 mm

12–10 AWG (4–6 mm
2 Hardware structure
Description
Description
2
)
24